Mitutoyo Surftest Sv400 User Manual Full Fixed «iPhone TRUSTED»
Websites like ManualMachine.com , ManualsLib.com , or IndustrialManuals.com occasionally host scanned copies. Ensure the scan is readable (300+ DPI) and contains the appendices (usually missing in pirated copies).
: For older "SV" series units (like the SV-3100), detailed safety and operational procedures are available through providers like Artisan Technology Group . Key Features for Your Reference
series (SJ-401/SJ-402), including key operational aspects typically found in the full user manual. The Surftest SJ-400 mitutoyo surftest sv400 user manual full
Check the printer connection or thermal paper supply. 6. Accessing the Official Manuals
This comprehensive guide provides an overview of the Mitutoyo Surftest SJ-400 Go to product viewer dialog for this item. Websites like ManualMachine
| | Possible Causes | Suggested Solutions | | :--- | :--- | :--- | | Inconsistent or Fluctuating Readings | Workpiece not properly seated; incorrect cutoff length selected; damaged or contaminated stylus tip; mechanical vibration; parameter misinterpretation | Re-seat the workpiece; select an appropriate cutoff (e.g., 0.8mm for milled surfaces); clean or replace the stylus; isolate the unit from vibration; verify measurement parameters in the manual. | | Device Fails to Power On | Loose power cord; blown internal fuse; faulty power supply; connection issue from previous maintenance | Check all power connections; inspect internal fuses (refer to manual for location); contact a qualified technician for power supply diagnosis. | | Stylus Skips or Drags | Excessive surface roughness; foreign debris on surface; worn or damaged stylus; traversing speed too high | Measure a smoother area; clean the surface; replace the stylus; reduce the traversing speed via the controller menu. | | Error Code Displayed | Specific internal fault (e.g., driver error, limit switch engaged) | Note the exact error code and refer to the "Error Messages" section of the user manual for the specific definition and corrective action. | | Communication Failure (RS-232C) | Incorrect baud rate; wrong parity or stop bits; faulty cable; outdated or incorrect drivers. | Consult the "Data Output" section of the manual to verify your communication settings match both the SV-400 and the receiving device. |
Wipe the drive unit and guide rail periodically with a clean, dry, lint-free cloth. Do not use harsh solvents or aggressive cleaners. foreign debris on surface
The SV-400 is typically used for high-accuracy surface roughness measurements and features: Measurement Parameters : Supports standard parameters including Calibration : Requires the 178-611 Reference Step Specimen