Connect: Pin 15 (Vcc) → +12V Pin 12 (GND) → GND Pin 6 (RT) → 10kΩ resistor → GND Pin 5 (CT) → 0.1µF capacitor → GND Pin 4 (Vref) → Measure 5.1V Pin 11 & 14 → Oscilloscope to check PWM outputs
Connect an oscilloscope to the Output A and Output B pins to observe the dead-time and duty cycle changes in real-time. download sg3525 library for proteus better
Simulates shutdown pin behavior during overcurrent or overvoltage events. Connect: Pin 15 (Vcc) → +12V Pin 12