Harvey Hv3 Water Softener Installation Manual Free [exclusive]

Run a 1/2" high-pressure hose from the drain outlet on the softener to a standpipe or a waste pipe. There must be an "air gap" at the discharge point to prevent back-siphonage.

Use the manual regeneration feature on your HV3 to pull the water from the brine tank into the resin tanks. This will start the water-softening process. After this cycle completes, the unit will be fully operational. harvey hv3 water softener installation manual free

A: It is strongly recommended to use only Harvey block salt . The system is specifically designed for it. Using granular or tablet salt can cause blockages and may void your warranty. Run a 1/2" high-pressure hose from the drain

Replenish the block salt and wait 24 hours for a regeneration cycle. Blocked drain line harvey hv3 water softener installation manual free