Look for a device with a yellow warning triangle, or one labeled / Cirrus Logic Logiccs . Right-click the device and select Update driver . Choose Browse my computer for drivers .

Open the extracted folder and go to BootCamp > Drivers > Cirrus (or Realtek , depending on your exact sub-model). Run the Installer in Compatibility Mode: Right-click the .exe setup file (e.g., CirrusAudio64.exe ). Select Properties and click the Compatibility tab.

: Modern Windows 10 installers default to GPT/UEFI. For this hardware, the audio controller requires an MBR-based "Legacy" boot to be visible to the OS. Recommended Solutions

glowing inside your headphone jack, your Mac thinks an optical (digital) cable is plugged in, which mutes the internal speakers. Software Cause:

Installing the correct audio driver for your MacBook Pro 2012 running Windows 10 can be a challenge. However, by following the steps outlined in this article, you should be able to find and install the correct driver. If you're still experiencing issues, try the alternative solutions provided. With a little patience and troubleshooting, you should be able to get your audio working smoothly on your MacBook Pro 2012 with Windows 10.