Ericsson Mini Link Cli — Commands

Configuring and monitoring the physical microwave link is the primary task of a transport engineer. Use these commands to manage frequencies, modulations, and power settings. Checking Link Status

Beyond individual commands, the CLI is integral to performing specific network functions. Here's how the CLI is applied in two critical areas: ericsson mini link cli commands

| Feature | MINI-LINK TN | MINI-LINK CN | |---------|--------------|---------------| | CLI access | Serial + SSH/Telnet | Serial + SSH (Telnet optional) | | Radio interface naming | radio0, radio1 | cn_radio0, cn_radio1 | | Ethernet interfaces | eth0 (mgmt), eth1..ethN | eth0 (mgmt), fe1..feN (FastEthernet), ge1..geN (GigE) | | QoS commands | Full support | Limited on older CN models | | Adaptive modulation | Yes (ACM) | Yes (ACM) | | Synchronization | SyncE, TDM, 1PPS | SyncE, TDM | Configuring and monitoring the physical microwave link is

show pm-data (Provides radio link signal strength, BER - Bit Error Rate). Ping Test: ping (Tests layer 3 connectivity). 4. Maintenance and System Commands Here's how the CLI is applied in two

: Checks the current temperature of boards and units within the node.

interface ethernet 1 description "To Core Router" speed 1000 duplex full auto-negotiation enable no shutdown exit