Iwata 2crh Bundy Clock Manual Site

: To restore all factory defaults, press the Reset button or use the key combination [+] + [Clear] + [Mode] simultaneously.

Set the exact hour and minute when the clock should revert to black print (e.g., 12:00 for lunch break). Setting the Internal Alarm / Siren iwata 2crh bundy clock manual

Ensure the time card is inserted straight. Clean the optical card sensor with a can of compressed air. Worn out ribbon or backwards installation. : To restore all factory defaults, press the

He navigated to to confirm the year, then Code 01 for the month and date. Finally, at Code 03 , he adjusted the hour and minute to match the atomic clock on his phone. The Red and Black Line Clean the optical card sensor with a can of compressed air

Pinch the ribbon release tabs or clips and pull the old cassette straight out.

To program the Iwata 2CRH, you must access the programming mode. Unlock and remove the top cover using the key provided in the packaging. Step 1: Entering Programming Mode Ensure the device is plugged into a power outlet. Locate the programming switches under the top cover.

The month and date digits will now flash. Repeat the adjustment process using or - , then press ENTER .