copy tftp: flash: # Source: c3560-ipservicesk9-mz.150-2.se11.bin # Destination: flash:c3560-ipservicesk9-mz.150-2.se11.bin
config t boot system flash:c3560-ipservicesk9-mz.150-2.se11.bin end write memory C3560-ipservicesk9-mz.150-2.se11.bin
To deploy C3560-ipservicesk9-mz.150-2.se11.bin , an administrator typically follows these steps: copy tftp: flash: # Source: c3560-ipservicesk9-mz
: This identifies the hardware platform. It is designed specifically for the Cisco Catalyst 3560 Series of fixed-configuration, enterprise-class switches. Legacy 3560 switches with only 16MB of total
This binary image typically requires roughly 15MB to 20MB of free onboard Flash storage. Legacy 3560 switches with only 16MB of total Flash cannot comfortably hold this image alongside web management files (tar packages). You will need a switch variant with at least 32MB of Flash .
Obtain the file from the Cisco Software Center (requires CCO login). Copy: Use TFTP/FTP to copy the file to the switch flash. copy tftp: flash: Use code with caution. Configure Boot Variable: