Lahti Precision Tpl400 Manual Extra Quality Jun 2026

The programming can be performed using either an external hand-held device (model LP2) or a built-in programmer with an LCD display (model LP1). The programmer allows you to set limit values, pre-act values, hysteresis, and latching functions. The device also provides support for auto-taring (zeroing out the container weight) and peak-hold, which can be activated via an external volt-free contact closure.

To enter the configuration menu, press the setup key combination (or activate the internal calibration switch, depending on firmware restrictions). Core Menu Structure lahti precision tpl400 manual

IP65-rated front panel (dust-tight and water-jet resistant). The programming can be performed using either an

: Mount the unit on a rigid surface free from heavy structural vibrations. If mounted near high-vibration machinery (e.g., concrete mixers or shakers), apply external rubber vibration isolators. 2. Electrical Wiring Guidelines To enter the configuration menu, press the setup

Lahti Precision TPL400 Manual: Comprehensive Guide and Technical Overview